Progress on the floors

First of all, we took last weekend off so that we could watch the Seahawks win the Super Bowl! Now, we are back at it.

This weekend we prepared the floors to be sanded and finished. We had to move a lot of stuff to the shed, move stacks of heavy lumber to the lofts, and plug the holes where we counter sunk the screws that hold the floor in place. Next weekend, we will sand and finish the floors!

Here is a look at the holes before we plugged them.

20140209-183451.jpg

And a look at the plugs after we put them in. We used wood glue in the holes and then put the plug in. Sounds easy, but we were up until 4 am to get them done. Yikes!

20140209-183519.jpg

Here is a picture of how the plugs are made. We have a drill press that cuts little cylinders in the wood.

20140209-183532.jpg

Then you pop them out with a screw driver.

20140209-183539.jpg

After you put them in and let the wood glue dry overnight, you have to cut them flush with the floor and do some sanding to make sure the edges of each plug won’t snag the floor sander.

The , voila! A plugged floor.

20140209-183548.jpg

20140209-183555.jpg

One thought on “Progress on the floors

  1. woody

    they look great .. it still took that long AFTER Parker helped you?? just joking.. that was a lot of work and they will look great after finishing… as I said before I am IMPRESSED with all the work you have done… you are going to put the Yellow Pages out of business.

    Reply

Leave a Reply to woody Cancel reply

Your email address will not be published. Required fields are marked *